• Home
  • Equipment Orientation: Carvey

Equipment Orientation: Carvey

  • Thu, November 09, 2023
  • 6:00 PM - 8:30 PM
  • make717 Innovation Center
  • 1

Registration

  • After you receive the code, you may register for an upcoming Carvey class.

Registration is closed

Member orientation for the Carvey!

This machine features a 300W, 12,000 RPM spindle, a 8"x11.5"x 2.5" work area and is suitable for routing wood, wood products, a variety of plastics and other materials. It also features a cloud-based operator interface, Easel, where you can create your design and control the machine.

This class is the basic orientation for anyone who wants to use the Carvey, and we will be meeting in the new Woodshop room.  

This class requires some homework to be accomplished before you can register.  

To attend, you must:

  • Be a member in good standing or a STEMPass holder
  • Bring in (or purchase on arrival at make717) safety glasses since we will be in a safety glasses-required room
  • Complete the design phase at home. It should take less than 30 minutes to complete, but it could be longer if you wish to keep tweaking!
  • Complete the quiz that will give you the code needed to register below
  • Register for a class using the code emailed
Follow the instructions here: https://www.make717.org/Carvey/.

If you have already completed the design, you can obtain the registration code by completing this quiz. A passing grade will send the code to your email.

Walk-ins. are not accepted for this class. Class size is strictly limited due to time, distancing, and equipment availability.

This session will be taught by Micah Story.


Primetime hours for maker members
Mon - Fri: 5pm to 9pm
Saturday: 10am to 9pm
Sunday: 10am to 5pm


Copyright 2017 make717, Inc. All Rights Reserved 
Mailing Address:  1653 Lititz Pike #1213, Lancaster, PA 17601
Makerspace Address:  1151 Clark Street, Lancaster, PA 17602
(717) 537-1067 info@make717.org

Powered by Wild Apricot Membership Software